Thank you~

Thank you~^^;

1. Change sampling method: Try changing it for each type. The feeling is different. I can give you a recommendation, but it's hard to pick your own picture, so if you're trying to find civitai2022's own feel, try changing the sampling method one by one to the same fromm and the same settings.

2. CFG Scale change: The image may be broken depending on the CFG Scale change. Since it is difficult to do all the requirements (Recommendation 1), a higher value of 4.5~8 or 16~25 is also good, but if you use it like that, most of the pictures will be broken. So at this time, activate Dynamic Thresholding (CFG Scale Fix) and set Mimic CFG Scale value smaller than CFG Scale. Top percentile of latents to clamp is around 99.95~99.8? Find the Mimic Scale Scheduler and CFG Scale Scheduler that you like. Minimum value of the Mimic Scale Scheduler The value is between 1 and 3. Minimum value of the CFG Scale Scheduler is also between 1 and 3. This also changes the feel of the picture.

3. Enable ADetailer I use this, but the ADetailer model uses face_yolov8n.pt and mediapipe_face_full, and there is no difference.

Please look at my picture and add or change the prom below.