Realism by Stable Yogi · Krea 2 · V2.5
The full-spectrum Realism — every look, every mood, the widest range we've built.
✨ What's NEW in V2.5
- The complete blend. Everything from V2.0 plus a richer, moodier warmth — the broadest range of faces, skin, light, and mood in one model.
- Full versatility. Clean documentary, warm film, moody and cinematic — it does all of it, guided by your prompt.
- Real skin, believable light. Natural texture up close, dimensional light across the frame.
- Handles anyone. Young to mature, every look, exactly as prompted.
- Turbo. Full images in 8 steps.
⚙️ Settings
- 8 steps · CFG 1 · Euler · Simple · native 1024–2048.
- (Model only — pair with the Qwen3-VL text encoder + Qwen-Image VAE*, same as base Krea 2)*
⭐ Want more? The PRO cut pushes richness and cinematic depth further — see below.
Made by Stable Yogi, drop a ❤️ and tell us your favourite look.
===========================================================
Realism by Stable Yogi · Krea2 · V2.0
Shot-on-film realism — everything V1.5 knew, now with a warm analog soul.
✨ What's NEW in V2.0
- Filmic look. Warm tones, natural grain, real photographic texture — like it came off a film camera, not a render.
- Carries V1.5 forward. All of V1.5's range and knowledge, plus a richer, more cinematic eye.
- Heavier skin detail. Pores, freckles, fine texture — believable up close.
- Handles anyone. Young to mature, every look, exactly as prompted.
- Turbo. Full images in 8 steps.
⚙️ Settings
- 8 steps · CFG 1 · Euler/ER SDE · Simple/Beta · native 1024–2048.
⭐ Want more? The PRO cut pushes the film texture and depth further — see below.
Made by Stable Yogi 🧘 — drop a ❤️ if the film look is your thing.
==========================================================
Realism by Stable Yogi · Krea2 · V1.5
The most true-to-life Realism yet — everything V1.0 knew, now with more range and a softer, more natural eye.
✨ What's NEW in V1.5
- Broader knowledge. V1.5 carries everything from V1.0 and adds more — a wider range of faces, skin, and light in a single model.
- More natural, more documentary. Softer, real-photo feel — natural window light, believable skin, none of that AI gloss.
- Handles anyone. Young to mature, every look — ask for it and you get it, not an approximation.
- Real skin. Pores, fine lines, freckles, texture that reads like a camera shot it.
- Turbo. Full images in 8 steps.
⚙️ Settings
- 8 steps · CFG 1 · Euler · Simple · native 1024–2048.
I generated all images on forge UI.
⭐ Want more? The PRO model on my portal dials the richness and cinematic depth up a notch .
Made by Stable Yogi 🧘 — drop a ❤️ if it shoots the way you hoped.
===========================================================
Realism by Stable Yogi · Krea2 · V1.0 NVFP4
Realism by Stable Yogi · Krea 2 · V1.0 — NVFP4
The NVFP4 (4-bit) build of Realism V1.0 — made for RTX 50-series / Blackwell cards.
Smallest & fastest — ~8 GB, native FP4 tensor cores. Lowest VRAM, top speed on 50-series.
Same realism — real skin, natural light, true-to-life — no quality loss from 4-bit.
Runs in ComfyUI + the latest Forge (Blackwell only — on older cards use the INT8 / fp8 / GGUF versions instead).
⚙️ Settings: 8 steps · CFG 1 · Euler · Simple · native 1024²+
(Model only — pair with the Qwen3-VL text encoder + Qwen-Image VAE, same as base Krea 2.)
Made by Stable Yogi , get Pro release on my portal.
Realism by Stable Yogi · Krea2 · V1.0 EXTENDED
Most turbo models pin you to one setting: change the steps or the guidance and the image falls apart. Extended doesn't. It holds together across a real working range, so you can tune the result instead of accepting it.
⚙️ Settings
Recommended: 16 steps · CFG 2 · Euler · Simple · native 1024²+
Works across: 8–20 steps · CFG 1–3
⚠️ Don't go above CFG 3.
✨ Why you'd want it
Dial in your own look. Lower CFG for soft and natural, higher for punch and contrast. Fewer steps for speed, more for polish. Your call, not the model's.
Extra steps actually pay off. At 16 steps you get the richest version of Muse — deeper light, warmer tone, more presence.
It follows your prompt harder. More guidance headroom means when you ask for a specific scene, you get that scene.
Still quick when you're in a hurry. 8 steps works fine for drafts and batch runs.
🎯 Which one should I use?
Realism by stable yogi Krea2 V1.0 (standard)Speed. Sharpest at 8 steps — the everyday default.
Realism by stable yogi Krea2 V1.0 Extended
Control and quality ceiling. Give it 16 steps, CFG 2.
Made by Stable Yogi 🧘 — drop a ❤️ and show me what you tune it to. Looking for a Pro Versions check here on my portal.
==========================================================
Realism by Stable Yogi · Krea2 · V1.0
A new photoreal line for Krea2 — natural, believable and photorealistic.
True-to-life realism — real skin, pores, freckles, natural light, filmic depth (not AI-glossy).
Prompt-controlled — dressed when you ask, spicy when you ask. You're in charge.
Candid & editorial — portraits and full scenes both hold up.
Turbo — 8 steps. · Separate line from Muse (clean base, fresh realism blend).
Downloads: INT8-ConvRot , Q8 , Q4 , Fp8 Scaled
Settings: 8 steps · CFG 1 · Euler · Simple · native 1024–2048.
⭐ Want more punch? The PRO edition on my portal is dialed up further.
Description
Realism by Stable Yogi · Krea2 · V2.0
Shot-on-film realism — everything V1.5 knew, now with a warm analog soul.
✨ What's NEW in V2.0
- Filmic look. Warm tones, natural grain, real photographic texture — like it came off a film camera, not a render.
- Carries V1.5 forward. All of V1.5's range and knowledge, plus a richer, more cinematic eye.
- Heavier skin detail. Pores, freckles, fine texture — believable up close.
- Handles anyone. Young to mature, every look, exactly as prompted.
- Turbo. Full images in 8 steps.
⚙️ Settings
- 8 steps · CFG 1 · Euler/ER SDE · Simple/Beta · native 1024–2048.
⭐ Want more? The PRO cut pushes the film texture and depth further — see below.
Made by Stable Yogi 🧘 — drop a ❤️ if the film look is your thing.
FAQ
Comments (8)
can we have int8 convrot or bf16 thk you
INT8-ConvRot lands on the 4th, so not long to wait. No bf16 though, I only ship fp8-based builds. It'll be on my portal too.
What workflow better to use
Any standard Krea2 workflow works fine, and the default Krea2 template in ComfyUI is the easiest place to start. One thing to watch, if you grabbed a GGUF build it needs the GGUF loader node rather than the standard one. Settings wise, turbo cuts want CFG 1 and low steps, Extended handles CFG 1-3 and 8-20+.
heard this thru the grapevine:
Use .safetensors if: You are training, merging models, or have endless VRAM headroom to run pure uncompressed fp16.
Use GGUF if: You are running local inference on consumer hardware, want to fit massive models (like Krea-2 or FLUX) cleanly into your VRAM, and need rock-solid stability without OOM crashes.
it ran as downloaded. Thank you.
Glad it ran straight off. Small correction though, safetensors is just a container, not a precision. My INT8, fp8 and NVFP4 builds are all safetensors and all sized for consumer cards, so you don't need GGUF to avoid OOM. Plenty of sizes on my portal if you want to compare.
@Stable_Yogi I thought GGUF was binary, and smaller for any precision? fp16 + a couple LoRAS will OOM my 4090. Well, your GGUF runs great. Doesn't it also handle memory differetly than safetensors? Like offload to avoid a OOM on the GPU?
@beckynleslie864 Good question. Both are really the same kind of thing, just a box the model sits in, so neither one is smaller by itself. What makes a file big or small is how much detail the weights are saved with. GGUF has some well known small settings, but safetensors can be saved small too, and that's what my INT8, fp8 and NVFP4 ones are.
You're not wrong that it feels lighter though. That's your software doing that, not the file. Comfy and Forge both push parts of the model into normal RAM when your card runs out of room, whichever one you load. GGUF just keeps things packed a bit tighter while it works, and the small safetensors do much the same.
One heads up before you go looking, NVFP4 is my smallest but it only runs on 50 series cards, so on a 4090 go for the fp8 or INT8 one. And if you use LoRAs in Forge, update the extension, that used to be a bit buggy.
If the GGUF is running great for you though, honestly just stick with it.