CivArchive
    Wan 2.2 Close-Up Facial Cumshots - v1.0 High
    NSFW

    Overview

    This LoRA is for Wan Video 2.2 I2V-A14B. It does close-up facial cumshots with cum on face and cum on tongue. It is meant to generate these with thick sticky slimy cum. It can somewhat generalize to wider camera angles but it works best with input images where the face fills a large part of the frame. See example images below.

    I will update this text over time, I don't know all to write right now.

    Quickstart

    • Use input image with face and penis

    • No specific trigger word

    • Prompt with phrases like: penis shoots cum onto face

    • Strength: 1.0

    • CFG: High 1.0 — 2.0 Low 1.0

    • Steps: High 4 Low 4 — 6

    • Sampling shift: 2.0 — 12.0


    Generation

    This model is image-to-video! The input image sets the scene, lighting etc. Including a penis and the beginning of a cumshot in the input image gives a lot of control, but neither is necessary.

    Input image

    The model performs a lot better in certain framings. I recommend starting from a framing similar to these:

    🛈 Getting the right look depends a lot on the scene's lighting so make sure to use input images with nice lighting.

    Prompt examples

    Here are a few complete example prompts. Look further down in the prompting section for a few more details.

    the video shows an erect penis shooting monstrous amounts of cum into woman's face with fast rhythm. multiple thick slimy cum shots. every cum shot sticks thickly to her face. her whole face gets buried in slimy cum. the cum is sticky.
    the video shows an erect penis shooting abundant amounts of cum into woman's face. the separate cum shots spurt with very fast rhythm from the penis. countless thick slimy cum shots erupt. every cum shot sticks slimily to her face. her whole face gets buried in sticky cum.
    penis shoots cum. the cum shots are huge and substantial, thick and girthy. the texture and consistency of cum is sticky and gelatinous. the cum shots explode forcefully from the penis. the cum shoots with quick steady rhythm. slimy cum hangs from her face.

    🛈 All the recommended settings given here are with Lightx2v being used. I have not explored settings without it.

    Strength: 1.0

    1.0 works best for both the high and low-noise models. You can go higher for the high-noise model to exaggerate the concepts — at cost of strange behavior and image quality.

    CFG

    High-noise: 1.0 - 2.0

    1.0 is the baseline. Increase to get thicker, more exaggerated cum. It seems higher resolution generations require higher CFG to maintain this effect. Issues appear at high values — usually related to lighting. I've had 4.0 and above work for some prompts, but it depends.

    Low-noise: 1.0

    For the low-noise model I leave it at 1.0. I haven't seen much difference when changing it.

    Steps: High 4 + Low 4

    4 steps for both high and low works well.

    High-noise: 4

    I consider 4 steps the minimum for the high-noise model. At lower counts some issues may appear:

    💀 If cumshots "erase" each other you may have too few steps for the high-noise model. Try increasing.

    💀 Similarly if cum appears on the model's face out of nowhere while no cum shoots from the penis — increase the step count for high-noise.

    Low-noise: 2 - 6

    4 steps is a good middle-ground for the low-noise. Additional steps can give more detail in the cum. I've not seen much improvement from going higher than 6. Fewer steps (2-3) can make it appear more voluminous but with less detail.

    Sampling shift: 2.0 - 12.0

    You can leave this around 2 - 12. The model will generate slightly differently based on this value. The valid range goes up to 100 but results degrade the higher you go in my experience. If the cum doesn't look or behave the way you want you can try adjusting the shift. I usually change it 1.0 at a time with fixed seed, exploring the 2.0 - 8.0 range to see if results improve.

    Prompting

    Prompt using natural language and use keywords from the tags list (see tags used below). Describe the scene and other things as you would normally for Wan 2.2.

    Cumshot rhythm / cadence

    It usually responds to phrasings like these:

    • slow rhythm cumshots

    • fast rhythm cumshots

    • very fast rhythm cumshots

    Cum amount

    It usually responds to phrasings like these:

    • monstrous amounts of cum

    • abundant amounts of cum

    • huge cum shots

    • big shots of cum

    Start image without penis

    To have a penis appear during the video, prompt it into existence. For example:

    • penis enters from the left

    • penis appears on right


    My workflow

    I create and render my start images in Blender. Many great 3d resources are available at Smutbase and PolyHaven. I include a penis that shoots the first cumshot. By changing the size of the start shot you often control the size of shots in the video. I use Blender's motion blur to control the force/velocity of the shots. Creating your start image from a 3d scene also gives full control over lighting.

    🛈 Most of my published videos have the workflow embedded. The released model uses different file names, so if my workflows are missing the LoRA files simply replace them with the high and low from this release.


    Known issues

    • When the penis is far from the target's face cum streams can become suspended mid-air. This LoRA is very keen to connect streams between penis and face because it doesn't know it shouldn't happen over longer distances.

    • Generated penises don't look good. Overcome this by using a penis LoRA or having one in the input image.

    • The trained concepts don't work equally well from all camera angles and framings. It does some things a lot better from certain angles. This is due to my small dataset.

    • Sometimes the model wants to make cum appear from above. To stop this avoid words like drench, splash, spray and similar. over, above and the like may also be problematic. My guess is it's triggered by words related to water concepts in the base model. Lowering CFG on the high-noise model can also help.

    I want to improve this LoRA but I only have limited time, so don't expect frequent updates.


    About the dataset

    • The dataset was 26 clips of 5 second length. High-noise model was trained at 256 x 256 and the low-noise at 512 x 512.

    • The average number of tags is 11.8 per sample video and the average number of words is 35.

    Tags used

    These are the most frequently used tags of the dataset. Use words from these in your prompts; it's not necessary to use the whole tags verbatim.

    • cum spurts from penis

    • cum shoots from penis

    • cum drips from penis

    • cum is sticky

    • cum on face

    • much cum on face

    • cum on tongue

    • man strokes penis

    • penis touches mouth

    • woman is happy

    • woman is calm

    • woman smiles

    • woman tongue is extended

    • woman mouth is open

    • woman eyes are closed

    • woman blinks eyes

    • woman eyes flutter

    • woman grimaces

    • woman looks up

    • woman looks into camera

    • top-down view

    • side view

    • profile view

    • front view

    • static shot

    • handheld camera

    • erratic camera movement


    Roadmap

    These are things I want to improve or expand this LoRA with in future versions. In no particular order:

    • Expand the dataset

    • Cum in mouth (new concept)

    • Woman strokes penis (new concept)


    Closing words

    Post any questions you have and I will try to answer. Enjoy!

    P.S. If I used your resource in any of the sample videos please let me know so I can credit you. I've used only this LoRA in almost all my generations while testing but something may have slipped through.

    Description

    First version. It is the successor of Wan Thiccum.

    FAQ

    Comments (53)

    Baka_OppaiMar 14, 2026· 2 reactions
    CivitAI

    Why these always look like elmers glue

    lethotrisv439
    Author
    Mar 14, 2026

    Under flat lighting it can look too opaque, is that what you mean?

    MMOFanMar 14, 2026· 6 reactions

    Someone's got thick cum envy. Eat more zinc and edge longer, watch John Holmes for tips.
    /kidding

    LetTheBassDropMar 14, 2026· 6 reactions

    That looks like normal healthy cum. If yours is clear or like water then you really need to see a doctor. This is a sign of prostate cancer.

    forsaken_double_aMar 15, 2026· 1 reaction

    Thick and sticky ftw

    HomeBoxOfficeMar 15, 2026
    CivitAI

    this is a much needed and great LoRA, my only question is, is there a trick to contain the cum only to the subjects tongue/mouth for a CIM scene, everything I've tried always ends up with half or more on the face, great work either way a lot of much needed features!

    lethotrisv439
    Author
    Mar 15, 2026· 1 reaction

    Thanks! Unfortunately it's not very good at this but you could try a few things. Move the penis closer to the mouth and have the model with their mouth open, best if you do this in the input image. Use tongue extended or extends tongue, and cum on tongue. To avoid it going everywhere try using penis drips cum instead of spurts or shoots. Drips cum is a weak concept so don't have too high hopes.

    Edit: @HomeBoxOffice I mentioned you in a post with the closest I think you can get. I will add CIM to my roadmap because I want it as a concept too.

    HomeBoxOfficeMar 17, 2026

    @lethotrisv439 That would be fantastic can't wait to see it soon hopefully!

    badhandproductionsMar 15, 2026· 4 reactions
    CivitAI

    This is genuinely fantastic work. Thank you.

    lethotrisv439
    Author
    Mar 15, 2026· 2 reactions

    So happy to hear this, I've put a lot of time into it!

    MMOFanMar 16, 2026· 1 reaction
    CivitAI

    The gentle coating of protein makes her skin glow, at least you should tell them that before you spuge them. /forscience

    RobertBobertsonMar 16, 2026· 6 reactions
    CivitAI

    Your description writeup is probably the best I've seen on this site. Should be the standard!

    lethotrisv439
    Author
    Mar 16, 2026

    Hey thanks!

    Kazuki_kunMar 16, 2026
    CivitAI

    Does it work well to cum over body/pussy/breasts as well or only facial? Nice work btw!

    lethotrisv439
    Author
    Mar 16, 2026· 1 reaction

    It's not trained on any of those and I haven't tried it. But it has a good understanding of cum and ejaculation in close-up views so it might work to some degree.

    nidudeMar 17, 2026· 1 reaction
    CivitAI

    This is really really terrific.

    lethotrisv439
    Author
    Mar 17, 2026

    Thank you!

    sircringealotMar 18, 2026· 2 reactions
    CivitAI

    This lora is really great. I get the highest quality, best detailed cumshots from this than any other lora.

    The only problem and the other loras do this too, is no matter what I cannot seem to stop the model from pouring cum from above onto the subject. It's so frustrating :(

    lethotrisv439
    Author
    Mar 18, 2026· 1 reaction

    Thanks. Yeah I still don't understand exactly what triggers that. Did you see my instructions about it in the write-up? Would be awesome if you could share your prompt?

    sircringealotMar 18, 2026

    @lethotrisv439 I did, I checked carefully to avoid usage of above etc. I put something like:

    "a single penis that is beside and below the woman and just barely in frame shoots high velocity loads of cum one after the other in a horizontal trajectory. The cum only originates from the penis and splatters onto her face and hair one after the other, spreading out evenly, with intentional pauses inserted between each spray."

    This is because im trying to get it to be as far away from the "cum from above" phenomenon its so obsessed with doing + I want the male actor to arrive from either side OR below. Literally just anything but above hahaha

    lethotrisv439
    Author
    Mar 18, 2026· 1 reaction

    @sircringealot my theory is that the base model has this concept for water or other fluids. I would try removing splatters and spray to see if it changes anything. Please let me know if removing those helps so I can update the troubleshooting steps.

    sircringealotMar 18, 2026

    @lethotrisv439 It seems to have helped.

    lethotrisv439
    Author
    Mar 18, 2026· 1 reaction

    @sircringealot great I'll add those to the description. Thanks for the feedback!

    fatberg_slimMar 19, 2026· 3 reactions
    CivitAI

    Fantastic work. I'm still running extensive tests but I'm impressed already. Can't wait to upload the finished clips. Solid work. I'll let you know when I find out something you could use to improve for a V2 some day.

    lethotrisv439
    Author
    Mar 19, 2026· 1 reaction

    Thank you! Can't wait to see what you create, and I'd really appreciate feedback!

    fatberg_slimMar 20, 2026· 1 reaction

    @lethotrisv439 So, I've uploaded some clips yesterday. Damn fun working with this. Some observations which may be limited to my setup, but I think you can use any feedback you can get.

    - CFG 1 or 2 doesn't matter that much.

    - GGUF or FP8 results are pretty similar. Usually I get notably different results when switching base models.

    - It also works nicely when you're not close up.

    - Prompting for watery and translucent cum sometimes makes the cum look more realistic, but it doesn't always work.

    Fine work again. This is going to become a staple now. 💦❤️

    lethotrisv439
    Author
    Mar 20, 2026· 1 reaction

    @fatberg_slim That's great, thank you. In some of my tests CFG 1 and 2 changes the consistency a lot. Like from OK to fn great. But I can't pinpoint which factors are at play. Sampling shift can have this effect too. Interesting with watery/translucent. I will try that.

    I'm looking forward to see more from you. You seem to have found the sweetspot and are using some really good image inputs.

    evilsnakeMar 20, 2026· 7 reactions
    CivitAI

    Any chances to get open eyes? Btw, fantastic work! My congrats for the tech sheet.

    lethotrisv439
    Author
    Mar 20, 2026· 2 reactions

    Thanks! I did some tests and I couldn't get eyes to stay open. I hadn't thought of it before. Looking at the tags I see I have only tagged actions where the eyes are closed and nothing about them being open. But it's tricky to tag because rarely are the eyes only open or only closed for a whole sample video. I've made a note to consider this when training next time.

    ss9999Mar 21, 2026
    CivitAI

    The cum in the example images is rather opaque so it looks a bit like Elmer's glue. Although guys can produce quite white cum, most of the time it's translucent.

    lethotrisv439
    Author
    Mar 22, 2026

    I think it's a bit overdone, but overall not far from what I want it to do. I'm biased. 😅

    soundgateMar 22, 2026· 2 reactions
    CivitAI

    OUTSTANDING!!!! Very realistic looking fluid dynamics. Great job!

    lethotrisv439
    Author
    Mar 22, 2026

    Thank you, I'm glad you like it!

    GoblintideMar 24, 2026· 2 reactions
    CivitAI

    Best one i've tried so far. Works well on other body parts too, not just face.

    lethotrisv439
    Author
    Mar 25, 2026

    Thank you! And great to hear that it works on other parts too, I want to try that but haven't had the time yet.

    LookSirDroidsMar 24, 2026· 1 reaction
    CivitAI

    Just wanted to say thanks. Not only for the lora itself, but for your explanation. I haven't been able to get my head around making stuff in ComfyUI until now. By opening one of your examples and dropping the right stuff into the workflow I managed to make an actual working video on the first try. Cheers!

    lethotrisv439
    Author
    Mar 25, 2026

    Awesome! So glad I was able to help, I've been lost like that before too.

    nullvoidnillnan637Mar 28, 2026· 2 reactions
    CivitAI

    Having tried all the cum loras for research purposes I can honestly say this is the best... and it's not even the top rated.

    lethotrisv439
    Author
    Mar 28, 2026

    Thank you, I'm happy you think that! It's quite new so hopefully it will gain traction.

    exogmpMar 31, 2026
    CivitAI

    the tongues are freakishly long sometimes. other than that its 👍

    lethotrisv439
    Author
    Mar 31, 2026

    What lol? I haven't seen that. Can you share any examples?

    exogmpMar 31, 2026

    @lethotrisv439 oh i didnt save any, i just remembered the prompt "extends her tongue" causing it sometimes so i tried not to include that action to prevent it.

    lethotrisv439
    Author
    Mar 31, 2026

    @exogmp okay I've not had that problem but it's probably some type of input I haven't tried.

    PTGApr 5, 2026· 6 reactions
    CivitAI

    For me this is the best facial cum shot lora i ever use. This doesn't change face, cum does not appear or disappear by magic. Hope to see more, in particular facial expressions, but I think it's complicated without altering the face. Great job !

    lethotrisv439
    Author
    Apr 6, 2026

    Thanks a lot! I haven't tried training facial expressions. It would be nice to have more control over them.

    randomyfrenchApr 6, 2026· 1 reaction
    CivitAI

    One of the very best loras along with sh00tz.
    Congratulations, keep up the awesome work !
    If you could add some prompt examples in the description it would be very nice

    lethotrisv439
    Author
    Apr 7, 2026· 1 reaction

    Thank you! There are a couple prompts in the description. But maybe not clearly presented as such. I'll look them over and update them too; I've used a few more variants by now that I can add.

    PsyMetricsApr 7, 2026· 2 reactions
    CivitAI

    The best cum lora ever, I'm waiting for improvements and new versions, the thing is that it works well with faces in the foreground, it would be good to have a wider view of the model.

    lethotrisv439
    Author
    Apr 7, 2026· 1 reaction

    Thank you so much. Wider view is not my focus, but I'm hoping it may be enough to include just a few wider-angle samples to make it understand. Then it might happen. Otherwise I just don't have good data to train on.

    PsyMetricsApr 8, 2026· 1 reaction

    @lethotrisv439 is good enough, i can't complain, i was waiting for that along time, cuz no body did it before

    Eliz99Apr 14, 2026· 1 reaction
    CivitAI

    Hello! what Wan 2.2 model you uses? TIA! 🤗✨

    lethotrisv439
    Author
    Apr 14, 2026

    Hi! I use Wan Video 2.2 I2V-A14B

    mortythemortApr 15, 2026· 1 reaction
    CivitAI

    After only 2 renders, and specifically using last frame to generate an even longer ***-shot scene with MASSIVE amounts of ***... I can say this is one of the best NSFW Loras I've used.

    LORA
    Wan Video 2.2 I2V-A14B

    Details

    Downloads
    10,357
    Platform
    CivitAI
    Platform Status
    Available
    Created
    3/14/2026
    Updated
    6/20/2026
    Deleted
    -

    Files

    CloseUpFacialCum-v10_High.safetensors

    Mirrors

    HuggingFace (43 mirrors)