This Lora is trained on the WAN 2.2 I2V 14B low and high noise models and can be used to generate facial cumshots. It works with or without a man present in the initial image.
Update 07/01 - Alt V2 out
Happy new year everyone! Hope you are all having a nice start of the year!
After some more testing, I decided to also put here a High/Low alt version of the V2, which seems to give better results in some situations. I think it's mostly in more zoomed in shots but could help in other cases as well. If there's something you are trying with the normal V2 and you think it could work a bit better, try out the alt version then.
Update 01/12 - New version out
Not everything I was going for worked out with this version, I need to tweak the dataset a bit a train again but I was anyway happy with the results and decided to share it.
Some concepts are not quite there and there's quite often alot of cum but... Enjoy!
Please check the Training Data zip attached to the High version for all the captions used in the training. Videos have the workflow attached.
Update 02/10 - Attached workflow file (to the high version)
Trigger Phrases (some work better than others, the least tested ones are highlighted below):
a woman is kneeling in front of a man
a woman is lying down on her back and the man is on top of her
a woman is kneeling in front of two men
cum shoots out of their penises and lands on her face and eyes
(cum shoots out of the penis and lands on her tongue)
cum shoots out of the penis and lands on her face and her eyes and her mouth
(cum shoots out of the penis and lands on her face and her mouth)
cum shoots out of the penis and into her mouth and tongue
big cum load
(high speed cumshot)
(thick cum load)
(cum strings)
she has her mouth open
she has her mouth open and her tongue out
she has her mouth and eyes closed
(she nervously smiles)
(she smiles)
(she flinches)
she frowns, she hates cum
she hates cum
the man strokes his penis back and forth with his hand
the men are stroking their penises back and forth with their hands
the woman strokes his penis back and forth with her hand
the view is from above
the view is from the side
big close-up
close-up
Works pretty ok with 6 steps and Wan21_I2V_14B_lightx2v_cfg_step_distill_lora_rank64.safetensors at strength 3 (high) and 1.5 (low).
CFG 1 - Euler Ancestral
Description
FAQ
Comments (62)
Not sure whats going wrong yet but I'm only getting motion and none of the cumshot. Usually only happens when using a T2V lora on I2V. Been jumping between checkpoints with the same results on everything so far.
this is definitely an I2V lora. are you using my workflow ? do you have the light2x lora?
nice, but we need a cum on butt or something, to many cum on face loras
This lora works on all parts of the body.
I agree, such a saturated niche at the moment, when are we going to bring back the piss LORAS?????
This one is great, oh the messes I've made on pretty faces. If it's possible, maybe you could try to make a "pull out of vag and blasts the area in cum". I don't think I've ever seen anyone here do that.
Hi, very well work! But, any video created doesn't appear any penis and the swallow is more like water. Why? And the lora downloaded, where I must put it? Any field are filled, where put the lora of this thread? Is it possible that my problem is the lack of this lora in the fields? thanks!
Hey there, are you using my workflow or what are you using here ? you need this lora and the light2x lora I mention in the description
@Civitaiwolfxx yes, used the second workflow video added on gallery! I'm a noob so possible that I wrong more than one steps, is it possible that I balance wrong the strenght of the models?
@Civitaiwolfxx in download I found only the high lora, not the low, is it correct?
if you use the workflow, it works as is as long as you have the correct loras. For the high and low versions, you need to check here at the top of the model page, you can change between V2.0 High and V2.0 Low and download both. You still need the light2x lora that I wrote in the description and didn't attach here
Thanks, I knowed more in these days! I need to ask you a question: why with all the version, normal and alt, the cum is few and thin? No matters what I prompt, the results are quite the same! Why I can do the same important cum on face like the example?
@casadio11491 I mean, the prompts I used are on the examples. Are you using the same or similar workflow ? the light2x lora, 6 steps etc etc ?
@Civitaiwolfxx Thanks for the reply! Yes I saw that I used a gguf Q3 instead Q8, noe I have more better results, I saw that few change are the I2V lora 2x that now I use the 2.2 and not the 2.1 in the workflow downloaded, the steps for this lora are 4, but in the workflow the node for the steps are actual on 8. Which one do you refer? p.s. real appreciate your work, your lora doesn't ruin any face meanwhile other are so rude with original aesthetic!
@casadio11491 really try the lora i use, that plus 6 steps ( 3 high 3 low ) plus the same model shift, you should see the same results.
Thanks for the appreciation
Its difficult when the trigger words are so long. Please shorten the trigger words to a simple word with numbers or similar in future, it makes triggering SO much easier.
To be honest, even though its not like I did exhaustive testing, I did find that this sort of trigger words wielded the best results
says there's an attached workflow but I dont see a .json file
its the training data file
@Civitaiwolfxx There is only an .txt file, no picture or .json file.
@Civitaiwolfxx thanks, also in case some one else is reading this and using runpod use this template it works "WAN 2.2-BLACKWELL" by antilopax
Idk what im doing wrong. Im using your WF from your video and i set to 5sec both t2v and i2v, but it generating me only 1 secone or less, WHy ??
when you say both t2v and i2v i'm assuming you don't mean both at the same time right ? were there any errors when loading the workflow, missing imports or something ?
do you have the light2x lora and the other things needed ?
HAPPY FUCKING NEW YEARS too you aswell my sister kawaiii :PPP
pls consider LTX 🙏
Version 1 LOW is showing as updated today, is that right?
it was just unpublished due to not having any images (?) so I uploaded one today and activated it again
Is that paragraph that's listed as a trigger word needed for this lora to function?
well, you can add more or less keywords to it to control it. for the bare minimum, you can just use the trigger words mentioned here in the lora card on the top right.
@Civitaiwolfxx I think what he meant was if the whole textblock is needed.
As far as I understand you need only the single sentences in the textblock and can combine them as you like. Right?
@blabbleblubbel0815362 indeed you are correct. In essence you really only need the "cum oozes/shoots out of the penis and lands on xxx". everything else is just trying to control what happens.
Thanks for stepping in mate
thanks for a good lora.
anyone who wants good results from this lora try this prompt
"pulls out penis and point the tip of penis at her face and continue stroking penis. penis ejaculate cum over woman's face, load of cum oozing all over woman's face."
replace "oozing" with "spraying" if you want jet spray type result.
but oozing gives it a lot more natural flow of liquid.
check my post for example.
Thx a lot.
Any tips on how getting a realistic penis enter a scene in I2V? all looking like plastic for me
Same here
Search for Insertion loras for wan 2.2. Those usually produce better penises then link this one into it.
Either that or use my deepthroat model to generate a short 3 second clip of the guy just showing up and then take the last frame and generate a cum facial out of that
Add the penis beforehand
In readme: Strength 3 on high and 1.5 on low. Is this for lightx2v lora or the cum lora?
That's the lightx2v lora. the cum lora is strength 1 in both
Hi, I am getting lora key not loaded. Using GGuf. Copilot suggests to use gguf lora loader. Is it hallusinating or is this the solution?
not really sure. did you try using my Workflow see if it works fine for you ?
@Civitaiwolfxx Your workflow. Had to use GGUF. It strangely does everything as ordered. But gives errors.
@Kiintins the workflow might have the loras with a different name, not sure if you fixed that to match the files you downloaded from here ?
cums like a charm!
Does anyone know how to get the workflow the author used? they said that they added it but I cant find the json and it appears to not be embedded into any of the mp4s?
Its the training data link
One of the videos with the workflow attached: https://civitai.com/images/115939732
@Civitaiwolfxx Why isn't the workflow loading? (It only loads one video block). I should mention that I'm a beginner.
@samochelogan131 you get some errors or what do you mean it loads only one video block ?
@Civitaiwolfxx solved, i found your .json, thanks!
hey thats good cum! bravo!
Thank you
where can you find wan22_realcum_high_noise_v1 ? I searched everywhere but cannot find it
Its this model here, that's my internal name for it. Sorry
This looks incredible! Would anybody be able to point me towards a guide that teaches how to get accurate anatomy and fluids in i2v renders? I used the prompts recommended my the lora creator, and I added a penis lora to my workflow along with this one, but I keep getting random objects dumping what looks like paint of the person's face.
Did you use the workflow(s) I mention in this model or in the deepthroat model ?
@Civitaiwolfxx I used the one attached to some of the sample vids for this model. I'll try the deepthroat model
@v00d00 and you are using all the loras and etc there ? like the light2x one ?
The cum becomes completed white. Does any know how to fix it please?
Have you tried describing it in your prompt? Try "Pink thick translucent cum" or something similar.
Are you using the same workflow and/or all the loras etc ?
Details
Files
Wan22_CumV2_High_Alt.safetensors
Mirrors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
WAN 2.2 - Cum - Cum Facial Wan2.2 V2 ALT HIGH.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors
Wan22_CumV2_High_Alt.safetensors