CivArchive
    Anal Missionary Wan (2.2!) - Wan 2.2 T2V HIGH
    NSFW

    Wan 2.2 v1 (T2V)
    This is incredible. I did make a few changes to the dataset, added a few variety pieces, and I trained on 720p this time, but... I think the improvement is all Wan 2.2. Can't be certain, but... I'll let the samples speak for themselves.

    Also, thanks to K3NK for the ridiculous workflow!

    v1.1 (T2V)
    This one is absolutely a one-trick pony, but that's kinda the point, right?

    All of my videos always save the ComfyUI metadata, so right-click / drag-and-drop for a starting point!

    v1.1 (I2V)
    Same dataset as the T2V model, just trained on the 480P 14B model.

    • I2V seems to like higher shift, 12-15

    • it also seems to like higher CFG, like 6

    • oh, and a lower model weight on the LoRA, like 0.8

    • Experiment, and let me know / share your results!

    a.k.a "The Adriano Angle"... IYKYK.

    Post what you've got with this, I'd love to see some other successful prompts!

    My first LoRA upload... This is WIP as I've been learning, but I figured I'd share what I got for feedback.

    For images, I use the absolutely fantastic TAME Pony, which I don't think gets anywhere near the credit it deserves.


    I followed dtwr434's very helpful Training Data guides for training WAN loras with diffusion-pipe, in fact I don't think I changed any settings at all for this one.

    Description

    Trained on Wan 2.2 14B, two Loras, High and Low

    FAQ

    Comments (41)

    BleedyAug 7, 2025· 1 reaction
    CivitAI

    I'd like to start doing some LoRa training of my own. You mentioned you followed dtwr434's training guide? Would you mind providing the link or path to get there? Thanks and great work!

    dngstn32
    Author
    Aug 7, 2025

    That was for Wan 2.1. For Wan 2.2, I changed it up quite a bit and stuck to the diffusion-pipe docs here. The Wan 2.2 details are all the way at the bottom.

    makiaeveliAug 7, 2025· 1 reaction

    Quite often the problem with training is not following particular setups. If you can follow trussell or misubituner docs, the most important thing you can do is garnering good data AND properly describe it.

    dngstn32
    Author
    Aug 7, 2025· 1 reaction

    makiaevelio543 Absolutely. The general flow I follow is:
    1. download 40-50 good, high quality clips that vary in composition, ethnicity, lighting, etc. but still have the core "concept."
    2. Resize and trim out watermarks etc., and normalize. Here I did 720p, 24fps, and all are either 3- or 5-second clips.
    3. Extract a frame from each video and run through JoyCaption Beta One.
    4. Manually go through each caption file and add movement and camera details that JoyCaption interrogating a single image won't pick up.

    makiaeveliAug 8, 2025

    dngstn32 +1 for the JoyCaption mention, I feel like it's the only photo-llm I've been able to actually use

    BleedyAug 8, 2025

    dngstn32 how do you use it? Is this a workflow? My only exposure to LoRa training so far is with Kohya.

    dngstn32
    Author
    Aug 8, 2025

    Bleedy You can download the sample videos I've shared and drag-and-drop them into ComfyUI. It'll load the workflow... from there it's up to you to install the needed custom nodes etc.

    makiaeveliAug 8, 2025

    Bleedy use the trainer? With the command line/powershell. They are describing a literal "work" "flow". Like you know, doing things. Lmfao. You can setup JoyCaption with a workflow, there are custom nodes that support it. JoyCaption is a whole other 8gb model. You could use it in command line like every other model or whatever. Just read the trussell docs lol.

    dngstn32
    Author
    Aug 8, 2025

    makiaevelio543 https://github.com/1038lab/ComfyUI-JoyCaption
    Batch workflow works great. I mentioned JoyCaption pertaining to training a Lora, not using the Lora.

    makiaeveliAug 8, 2025

    dngstn32 yes, good link. I felt like adding it would just be more confusing, but this is exactly what I was referencing. One would use this in Step 3, but could also edit it to help with step 2 and 4.

    BleedyAug 8, 2025· 1 reaction

    makiaevelio543 Gotcha - yeah I was interested in actually creating a LoRa for video and was trying to figure out where to begin. I'll read through the article a bit more. Thanks guys!

    neuraiai9377Aug 11, 2025

    dngstn32 i am trying to find out if i can train using my 4090 using your settings, how much vram did your training need?

    DaddyWolfgangAug 7, 2025
    CivitAI

    So we need to use two different loras and two different models to generate one video with Wan2.2? THis seems a bit cumbersome. :(

    dngstn32
    Author
    Aug 7, 2025

    For the 14B model, yes, that's the way it works. I'm sure we'll get some wizardry in the near future, but for now this is the only way you can use Wan 2.2

    makiaeveliAug 8, 2025

    The worst is knowing how often the models need to move around on your card, but most are already depending on that reality. So yes, it does take some extra time unloading/loading, but depending on your card, subsequent runs of the same prompt should go slightly faster -- than even Wan 2.1. It's impressive honestly. The first time I tried it when it launched I would agree, at least a little. Once I found a decent workflow (playtime_ai has great ones, simple enough to add your flavor of upscaling, grain, etc.), this model has been my go-to.

    Baka_OppaiAug 12, 2025

    dngstn32 not if you use gguf

    SD_AI_2025Aug 22, 2025

    @dngstn32  Insane how some people will never fucking be happy with what exists. Even when it's what's best.

    Buy a few billion dollars of GPUs, code your own better algorithms, and do it yourself.

    Or just fuckin' enjoy the (literally) best AI video mode ever created by humanity since the Big Bang. It's not that hard.

    @Baka_Oppai says the guy who posted 0 video... The MoE design in Wan 2.2 employs two specialized expert models to handle different stages of the video denoising process. Gguf runs on consumer-grade hardware with low VRAM, but it NEEDS both high and low models, components of the MoE architecture. Don't state what you don't know mate...

    AI_2_addictedAug 7, 2025
    CivitAI

    GREAT WORK!! WAN 2.2 VERSION IS FANTAAASTIC!!!

    AI_2_addictedAug 7, 2025· 1 reaction
    CivitAI

    The quality of the work is incredible! Please do an "ANAL FUCK RIDING IN BACKWARDS" version showing the butt view, that would be fantastic!

    dngstn32
    Author
    Aug 7, 2025

    This guy seems to have a good dataset, you should hit him up to train a Wan 2.2 Lora with it :) - https://civitai.com/models/1400486/wan-anal-reverse-cowgirl-pov-t2v-i2v

    AI_2_addictedAug 8, 2025

    dngstn32 Yes, it looks good but the quality of your loras is MUCH SUPERIOR in terms of movements, skin realism and camera angles.

    GradashoAug 8, 2025
    CivitAI

    can you throw a prompt somewhere>

    makiaeveliAug 8, 2025

    All the images just got oddly deleted or something. If you pull the metadata you might get the sample images. I had the workflow, but perhaps its too similar to K3nk's, or idk. It seems normal to me.

    makiaeveliAug 8, 2025

    This video depicts a couple engaged in a sexual act on a wooden bench in a university locker room. The girl is very skinny, with fair skin, dark brown long hair in a high ponytail, and small, natural jiggling breasts, is lying on her back with her legs raised and spread apart. She has a navel piercing and is looking up with open eyes, blowing a bubblegum bubble with a face of disinterest. She wears a red and white cheerleader's uniform with the skirt pulled up, the front of her uniform reads "U of A". Her skin glistens with a sheen, likely from oil or sweat. The man is massive, muscular, tall, and bald, and has very dark black African American skin and wears a red polo shirt with a coach's whistle dangling from his neck. He is positioned between her legs, holding her right leg up with one hand and penetrating her anally, fucking her ass deeply and slowly with his massive veiny black penis. His face is not visible in the video. The lighting is bright and even, highlighting the sheen on their bodies. The overall style is explicit and realistic.

    The camera zooms out to reveal the rest of the cheerleading squad standing around, cheering and clapping with red pom-poms and megaphones. A banner in the background reads "UNIVERSITY OF ANAL"

    dngstn32
    Author
    Aug 8, 2025· 2 reactions

    makiaevelio543 Lol, thanks for doing the U of A one. I laughed at myself for that one... but yeah, the images have the metadata, just drag-and-drop into ComfyUI. I've gotten alerts that they're "Under Review" so that might be why they disappeared. Hopefully that clears.

    dngstn32
    Author
    Aug 8, 2025· 1 reaction

    Alright, I went back, downloaded my own videos, copy-and-pasted the prompt into the images, and Saved. They should be back now.

    KiefstormAug 8, 2025· 7 reactions
    CivitAI

    Bro the vag looks like an Arby's roast beef sandwhich bun and all.

    dngstn32
    Author
    Aug 8, 2025· 2 reactions

    I mean... when your dataset consists of close-up shots of women that get routinely railed for a living, reality is what it is. I'm sorry?

    Kierkegaard420Aug 9, 2025· 11 reactions

    @Kiefstorm You have to add "roast beef" to the negative prompt.

    burn1one1one812Feb 6, 2026

    Lol that comment ha ha I seen some of the guys on other comments talking about the vagsacks that had me losing it. I'm like, thankfully I'm not the only one getting the vagsacks.

    jaumeAug 10, 2025
    CivitAI

    I tried the same prompts with other aspect ratios (3:2, 2:3) and it switched to a pov view interestingly, I tried also to combine this lora (high, low) with another one (high, low too) intended for vertical videos and the resulting video had lots of noise, even reducing both weights to 0.7

    dngstn32
    Author
    Aug 12, 2025· 2 reactions

    Every single video in the dataset I used to train is 720x400, so that's probably why.

    mobdik17378Aug 17, 2025· 6 reactions
    CivitAI

    I have NEVER once been able to make this shit work, no matter what I do to CFG, shift, starting image, nothing. The subject just fuckin stares at you like "what's a lora?"

    goodstrkAug 19, 2025· 1 reaction

    same, on any penetration lora, no mater what ive tried it dont work.

    forfreelsd368Sep 5, 2025· 1 reaction

    @goodstrk looks like a curse.

    SD_AI_2025Aug 21, 2025· 4 reactions
    CivitAI

    LoRA Manager grabs info from Civitai. Please always add at least one sample to the LOW model so that LoRA Manager can grab it and display an animated thumbnail. Quite convenient when working with tons of LoRAs. Thanks ;)

    SDGFDGFHFd46346Aug 26, 2025· 17 reactions
    CivitAI

    "Load my workflows!"

    Can you really not just put the triggers here?

    This is so much work every single time you wanna look at a keyword!

    boobkake22Aug 28, 2025
    CivitAI

    One note: I had difficulty with thinner bodies. The results are rad as is, but it seems resistant to skinnier people in my first experiments.

    (I tried a few times without lightx2 as well, since I know it introduces its own restrictions.)

    I've had fun exprimenting with your examples - when I make some things that aren't just variations on your examples, I'll consider posting some. Thank you for sharing them.

    jj43797771Sep 1, 2025· 6 reactions
    CivitAI

    Please make more anal loras, this one has the best anal there is, the outputs im getting are insane, the only thing I add is a pussy lora but outside of that this is fucking nuts! Much love!

    Nobody makes anal stuff :(

    zakakkiNov 18, 2025
    CivitAI

    great anus!

    inventov324Feb 18, 2026
    CivitAI

    I am getting this error when drag and drop: Unable to find workflow in 144055_IN_00001.mp4

    LORA
    Wan Video 2.2 T2V-A14B

    Details

    Downloads
    8,161
    Platform
    CivitAI
    Platform Status
    Available
    Created
    8/7/2025
    Updated
    6/12/2026
    Deleted
    -

    Files

    analMissionary_wan22_T2V_high_e30.safetensors