<h1 id="velvet-vice-krea-2-vision-prompter-v2.0.5">VELVET VICE — KREA 2 VISION PROMPTER v2.0.5</h1><h2 id="modular-krea-2-turbo-workflow-for-comfyui">Modular Krea 2 Turbo Workflow for ComfyUI</h2>VELVET VICE — KREA 2 VISION PROMPTER v2.0.5 is a modular ComfyUI workflow for Krea 2 Turbo, combining fast image generation, intelligent prompt assistance and multiple independent image-editing systems.The workflow includes dedicated paths for CREATE, Native Edit — Original, Native Edit — Custom and Classic Img2Img. Each branch is separated so inactive generation paths do not unnecessarily execute alongside the selected mode.Version 2.0.5 focuses on improved Native Edit behavior, cleaner branch isolation, more reliable ComfyUI Manager integration and a more stable public release.<h2 id="main-features">Main Features</h2><ul><li>Dedicated CREATE / Text-to-Image workspace</li><li>Native Edit — Original for source-faithful editing</li><li>Native Edit — Custom for grounded editing into a custom target format</li><li>Classic Img2Img with denoise-based image reinterpretation</li><li>Separate bypassable Native Edit and Classic Img2Img groups</li><li>VELVET VICE Prompt Director v2</li><li>Qwen3.5 9B assisted prompting</li><li>Full <code>MANUAL</code> prompting without Ollama</li><li>Prompt-First memory and branch isolation</li><li>Format &amp; Resolution presets plus manual dimensions</li><li>Optional refinement and five Detailer paths</li><li>Optional SeedVR2 finishing with independent branch routing</li><li>PowerLoRA integration</li><li>Improved interrupt / memory handling</li><li>Model-neutral Krea 2 model selection</li><li>Isolated Emerald + Violet Velvet Vice interface</li><li>Comfy Registry / Missing Custom Nodes support</li><li>Improved ComfyUI Manager installation and uninstallation</li></ul><h2 id="prompt-director-v2">Prompt Director v2</h2><code>ASSISTED</code> mode uses:<code>fredrezones55/Qwen3.5-Uncensored-HauhauCS-Aggressive:9b</code>Short ideas can be expanded into structured Krea 2 prompts while preserving important subjects, actions, composition and camera instructions.<code>MANUAL</code> mode completely bypasses Ollama.The included:<code>_INSTALL_AUTOPROMPT_MODEL.bat</code>and<code>INSTALL_QWEN_3.5_VISION_9B.bat</code>can download the recommended model through Ollama. If Ollama is not installed yet, install Ollama first and run the BAT again.<h2 id="image-editing">Image Editing</h2>Native Edit — Original is recommended for precise edits where identity, pose and composition should remain close to the source.Native Edit — Custom uses the source image for grounding while allowing a separate target format or aspect ratio.Classic Img2Img provides the traditional denoise-based alternative. The public workflow starts at denoise 0.40, with optional creative LoRAs disabled by default.Native Edit and Classic Img2Img now have their own independently bypassable workflow groups.<h2 id="comfyui-manager-registry">ComfyUI Manager / Registry</h2>VELVET VICE — KREA is available through the Comfy Registry.Canonical package:<code>velvet-vice-krea</code>Load the workflow, open Missing Custom Nodes, install VELVET VICE — KREA, restart ComfyUI and reload the workflow.Version 2.0.5 also improves Manager uninstall behavior and cleans up known legacy KREA installations while explicitly protecting the separate VELVET VICE LTX package.The included manual installer remains available as a fallback.<h2 id="model-neutral">Model Neutral</h2>The workflow does not force a specific personal checkpoint.You can select your own compatible Krea 2 model, VAE, encoder and LoRAs.Models and third-party model files are not included.<h2 id="bug-reports-and-feedback">Bug Reports &amp; Feedback</h2>If you discover a bug, unexpected behavior or a mode that does not work correctly, please report it.Whenever possible, include the error message, affected node or workflow mode, and a short description of what happened.Bug reports help me reproduce and fix problems in future releases — and every confirmed fix improves the workflow for everyone using VELVET VICE — KREA.Feedback, testing and detailed reports are always appreciated.<h2 id="creator">Creator</h2>Previous workflows were published under ILLUMINATE AI.VELVET VICE is the same creator under a new name and visual identity.Created by VELVET VICE Previously known as ILLUMINATE AI

VELVET VICE — INTELLIGENT PROMPTING · FLEXIBLE EDITING · MODULAR CREATION

V2.0.5 – Stable Edit, Registry &amp; Manager UpdateVELVET VICE · KREA 2 VISION PROMPTER v2.0.5 is a major workflow and stability update focused on prompt intelligence, reliable image editing, branch isolation, memory handling, ComfyUI Manager integration and a cleaner public release.The workflow keeps the independent CREATE, Native Edit and Classic Img2Img systems while significantly improving how each branch is executed, detected and managed.What changedNew KREA Prompt Director v2<ul><li>Upgraded to the same Qwen3.5 9B LLM used in the Velvet Vice LTX workflows.</li><li>Improved keyword-to-prompt expansion specifically tuned for Krea 2.</li><li>Better preservation of subjects, actions, camera instructions and important user constraints.</li><li>Adaptive prompt expansion avoids unnecessarily bloated prompts.</li><li>Improved handling of multi-subject scenes, composition, lighting and scene structure.</li><li>Local output validation and cleanup.</li><li><code>MANUAL</code> mode completely bypasses Ollama.</li><li><code>ASSISTED</code> mode uses a single LLM call.</li><li>Included Windows installer for the recommended model:</li></ul><code>fredrezones55/Qwen3.5-Uncensored-HauhauCS-Aggressive:9b</code>Prompt-First Memory &amp; Branch Gate<ul><li>The Prompt Director finishes before the heavy Krea rendering resources are allowed to resolve.</li><li>Ollama is released after prompt generation whenever possible.</li><li>Heavy CREATE / Native Edit / Classic Img2Img resources remain isolated from inactive branches.</li><li>Inactive branches now use safe ComfyUI <code>ExecutionBlocker</code> behavior instead of leaking invalid <code>None</code> resources.</li><li>Lazy inputs are resolved only when the selected workflow branch actually requires them.</li><li>Prevents inactive VAE, CLIP, MODEL and sampler paths from accidentally executing.</li></ul>Reworked Native EditKREA Native Edit has received a major technical correction.Two independent Native Edit modes are available:NATIVE EDIT — ORIGINAL<ul><li>Uses the original source format as the edit target.</li><li>Designed for source-faithful editing.</li><li>Best for preserving identity, composition, pose and camera framing.</li></ul>NATIVE EDIT — CUSTOM<ul><li>Uses the source image for visual grounding.</li><li>Generates into a separately defined target resolution / latent.</li><li>Useful when the edited result also needs a different format or aspect ratio.</li></ul>Additional Native Edit improvements:<ul><li>Grounded reference resolution corrected to 768 px.</li><li>Improved Krea2Edit reference wiring.</li><li>Source image, VAE, source latent and target latent are correctly supplied to the edit model path.</li><li>Better distinction between source-preserving editing and free image generation.</li></ul>Reworked Classic Img2ImgClassic Img2Img remains available as a completely independent image-to-image system.Unlike Native Edit, Classic Img2Img uses traditional latent denoise strength to determine how strongly the source image is reinterpreted.Stable public defaults:<ul><li>Denoise: 0.40</li><li>Optional creative LoRAs: OFF by default</li><li>SeedVR2: bypassed for the initial base render</li></ul>This gives users a neutral, source-faithful starting point before enabling stronger reinterpretation or enhancement.Independent Image Edit GroupsThe previous combined Image Edit Studio has been split so Native Edit and Classic Img2Img can be independently bypassed.New structure:<ul><li><code>04A — NATIVE EDIT STUDIO • ORIGINAL / CUSTOM</code></li><li><code>04B — CLASSIC IMG2IMG STUDIO • SOURCE / DENOISE</code></li><li><code>04C — IMAGE EDIT BRANCH CONTROL • ENABLE / GUIDE</code></li></ul>This prevents Native Edit and Classic Img2Img source paths from unnecessarily running together.The internal engines also remain independent:<ul><li><code>INTERNAL B — NATIVE EDIT ENGINE</code></li><li><code>INTERNAL C — CLASSIC IMG2IMG ENGINE</code></li></ul>SeedVR2 Output Isolation<ul><li>CREATE, Native Original, Native Custom and Classic Img2Img keep their own output paths.</li><li>New workflow-mode-aware SeedVR2 branch gates prevent inactive finishing paths from being evaluated.</li><li>SeedVR2 receives only the image / model resources belonging to the currently selected workflow mode.</li><li>A dedicated memory handoff can release Krea resources before loading the optional SeedVR2 finishing stage.</li></ul>New Format &amp; Resolution SelectorAdded directly to the CREATE / Text-to-Image branch.<ul><li>Choose common aspect ratios instead of manually entering width and height.</li><li>Portrait, landscape, square, widescreen, vertical and ultrawide formats.</li><li><code>PRESET</code> and <code>MANUAL</code> modes.</li><li>Full manual width / height control remains available.</li></ul>Render This StagePartial execution controls allow selected workflow sections to be tested more easily.Useful for working independently with:<ul><li>Base generation</li><li>Refinement</li><li>Detailers</li><li>SeedVR2 / Final output</li></ul>This makes troubleshooting and iterative workflow development considerably easier.Improved PowerLoRA Integration<ul><li>Newly created, duplicated or pasted PowerLoRA nodes can inherit the Velvet Vice KREA visual style.</li><li>KREA workflow detection remains isolated from Velvet Vice LTX workflows.</li><li>KREA styling does not overwrite LTX 2.3 / 2.5 graphs.</li></ul>Memory / Interrupt Improvements<ul><li>Improved cleanup after manually interrupted generations.</li><li>Avoids unnecessary aggressive model unloading.</li><li>Designed to reduce situations where large model allocations are unnecessarily pushed into system RAM.</li><li>Prompt resources and render resources are separated whenever possible.</li></ul>Missing Custom Nodes / Comfy Registry IntegrationVELVET VICE KREA is now properly mapped to the Comfy Registry package:<code>velvet-vice-krea</code>Velvet Vice workflow nodes include Registry metadata so ComfyUI Manager → Missing Custom Nodes can identify the correct package on clean installations.This makes sharing the workflow considerably easier because users no longer need to manually identify the Velvet Vice custom-node package.ComfyUI Manager Install / Uninstall Fix — v2.0.5v2.0.5 adds dedicated lifecycle support for ComfyUI Manager / Comfy Registry installations.<ul><li>Added <code>install.py</code> for legacy-install migration.</li><li>Added <code>uninstall.py</code> for Manager-controlled cleanup.</li><li>Known historical Velvet Vice KREA duplicate folders are automatically handled.</li><li>Read-only file attributes are cleared before Manager removes the active package, reducing Windows deletion / <code>WinError 5</code> problems.</li><li>The separate VELVET VICE LTX package is explicitly protected and is never modified.</li></ul>Canonical installation folder:<code>ComfyUI/custom_nodes/velvet-vice-krea</code>Legacy KREA folders handled by the cleanup system include:<code>ComfyUI-Velvet-Vice-KREA</code> <code>ComfyUI-Velvet-Vice-KREA-main</code> <code>velvet-vice-krea-main</code> <code>ComfyUI-ILLUMINATE-AI-KREA</code>Windows Portable HelpersThe release package includes the original helper BAT files:<ul><li><code>INSTALL_QWEN_3.5_VISION_9B.bat</code></li><li><code>run_nvidia_gpu_VELVET_VICE.example.bat</code></li><li><code>_INSTALL_AUTOPROMPT_MODEL.bat</code></li></ul>The Qwen installer downloads the recommended local model automatically through Ollama.Emerald + Violet UI<ul><li>Updated KREA-specific Velvet Vice color palette.</li><li>Existing Velvet Vice animated node behavior is preserved.</li><li>Theme ownership remains isolated from the separate LTX workflows.</li><li>Layout and spacing were refined throughout the workflow.</li></ul>Model-Neutral Public WorkflowThe public workflow no longer depends on a specific personal Krea checkpoint.Users are free to select their own compatible Krea 2 model installation.Model, encoder, VAE and compatible LoRA choices remain under user control.Independent Workflow ArchitectureThe four image-generation paths remain logically independent:ModeSource ImageTargetMain PurposeCREATENoNew latentText-to-ImageNative Edit — OriginalYesOriginal formatPrecise source-preserving editNative Edit — CustomYesCustom target latentGrounded edit into a new formatClassic Img2ImgYesEncoded source latentDenoise-based reinterpretationEach path has its own rendering and output logic while sharing the central Velvet Vice control system.Recommended First TestFor the cleanest first test:<ol><li>Select the desired workflow mode.</li><li>Use <code>MANUAL</code> prompt mode.</li><li>Keep optional Detailers and creative LoRAs disabled.</li><li>Keep SeedVR2 bypassed.</li><li>Confirm the base output first.</li><li>Enable enhancement stages afterward.</li></ol>For Classic Img2Img, start with denoise 0.40.For source-faithful edits, start with Native Edit.General<ul><li>Independent CREATE, Native Edit and Classic Img2Img architecture preserved.</li><li>Improved execution isolation.</li><li>Improved source-image handling.</li><li>Improved Comfy Registry compatibility.</li><li>Improved Missing Custom Nodes detection.</li><li>Improved ComfyUI Manager installation and removal.</li><li>Qwen3.5 Autoprompt installer included.</li><li>Full Image Edit documentation included.</li><li>Public release branding updated to v2.0.5.</li></ul>VELVET VICE · KREA 2 VISION PROMPTER v2.0.5 is focused on making Krea 2 generation and image editing smarter, more predictable, easier to troubleshoot, easier to install and much cleaner to distribute.

Files with SHA256: a4075baf039e4e9007e4b8d5338ffc7d87518afa56354101db88ae6464e91d71