Make pictures with MOSS-Image, the new open model that writes the words you give it. Signs, menus, posters and
labels come out spelled right when you put the words in "double quotes". Three switches help: Auto prompt writes a full prompt from a few words, Layout boxes puts things and words where you draw them, and Enlarge 2x with SeedVR2 makes the finished picture twice as big and sharper. Your picture starts a new picture from one of yours, or changes the words in it and keeps the rest. A Steps pill picks 50 steps, or 8 or 4 with a speed LoRA for a picture in about two seconds.
<h3>How to use it</h3>
<ol>
<li>Type your prompt. Put every word you want in the picture in "double quotes".</li>
<li>Set the size in Latent Size.</li>
<li>Run.</li>
</ol>
<h3>The switches</h3>
<ul>
<li>
Auto prompt. The text encoder MOSS already uses turns a few words of yours into a full prompt, and writes out
 every word that belongs on a sign, a menu or a poster. What it wrote shows in Show Text. A second or two more, no
 extra download.
</li>
<li>
Layout boxes. Draw a box for each thing or line of words and say what goes in it. Your prompt still describes
 the whole picture. The canvas starts empty.
</li>

<li>
Enlarge 2x with SeedVR2. SeedVR2 3B makes the finished picture twice as big on each side and sharper: 1024 x 1536 becomes 2048 x 3072, about 3 to 4 seconds more on an RTX 5090. It also takes away the softness of 8 and 4 steps. It sharpens a blurred background too, and small blurry writing can get made-up letters. It needs two more files (below); with the switch off they are not loaded.

</li>
</ul>
All three are off as the file opens.
<h3>Your picture</h3>
<ul>
<li>Off: a new picture from your prompt.</li>
<li>Start from it: load a picture of yours. The encoder describes it and adds what you typed ("make it a rainy night", "the sign says LAST TRAIN"), then MOSS draws a new picture from that description. A slider shows yours beside the new one. MOSS draws the scene again rather than editing your picture, so faces and small things change.</li>
<li>Change words: load a picture and it shows on the boxes canvas. Draw a box over the words you want to change, pick text and type the new words. MOSS redraws only inside your boxes, and the rest of your picture stays as it was, at its own size. The encoder describes your picture for MOSS, so your prompt is not used. With no box drawn, your picture comes back unchanged. About 4 to 5 seconds at 4 steps on an RTX 5090.</li>
</ul>
Off is picked as the file opens.
<h3>Steps</h3>
<ul>
<li>50 steps: the settings OpenMOSS gives, the most detail. About 18 seconds for 1.5 megapixels on an RTX 5090.</li>
<li>8 steps or 4 steps: a speed LoRA makes the picture in about 2 seconds or 1.5. It comes out a little softer than 50 steps; Enlarge 2x with SeedVR2 makes it sharp again.</li>
<li>Only one can be picked. The pill sets the steps and CFG and turns the matching row on in LoRA Loader. If its LoRA is missing, the run stops and names the file.</li>
</ul>
50 steps is picked as the file opens.
<h3>What you need</h3>
<ul>
<li>
ComfyUI 0.42.0 or newer. It is the first release with MOSS-Image (2026-10-18): update ComfyUI first. A git install: <code>git pull</code>, then <code>pip install -r requirements.txt</code>.
</li>
<li>
AusBoss nodes 2.16.1 or newer. In ComfyUI-Manager, search "AusBoss". Already have them? Update first.
Can't update yet? Download v1.2 from this page: the same workflow without Change words. Its second file, MOSS-Image Text to Image (AusBoss, core boxes).json, is for AusBoss nodes 2.13 or 2.14.
</li>
<li>The MOSS-Image files from <a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/MOSS-Image">Comfy-Org/MOSS-Image</a>:<ul>
<li><a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/MOSS-Image/resolve/main/diffusion_models/moss_image_sft_int8_convrot.safetensors">moss_image_sft_int8_convrot.safetensors</a> → <code>models/diffusion_models</code> · 5.41 GB</li>
<li><a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/MOSS-Image/resolve/main/text_encoders/qwen3.5_9b_int8_convrot.safetensors">qwen3.5_9b_int8_convrot.safetensors</a> → <code>models/text_encoders</code> · 9.75 GB</li>
<li><a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/MOSS-Image/resolve/main/vae/flux2-vae.safetensors">flux2-vae.safetensors</a> → <code>models/vae</code> · 336 MB</li>
</ul>
</li>
<li>For 8 and 4 steps, the speed LoRAs → <code>models/loras</code> · 1.19 GB each:<ul>
<li><a target="_blank" rel="ugc" href="https://huggingface.co/lodestones/MOSS-Image-SFT-8-steps-dmd/resolve/f95df83b5e90ae91ea412434b3f9b7f1c8c6314f/lora_latest.safetensors">lora_latest.safetensors</a> by lodestones, for 8 steps</li>
<li><a target="_blank" rel="ugc" href="https://huggingface.co/akhaliq/MOSS-Image-SFT-4-steps/resolve/5c6b125d1a1ae8847f0b44e4cb1cb10d38354ffd/lora.safetensors">MOSS-Image-SFT-4-steps</a> by akhaliq, for 4 steps. It downloads as <code>lora.safetensors</code>: rename it <code>MOSS-Image-SFT-4-steps.safetensors</code>.</li>
</ul>
</li>

<li>For Enlarge 2x, SeedVR2 from <a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/SeedVR2">Comfy-Org/SeedVR2</a>:
<ul>
<li><a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/SeedVR2/resolve/main/diffusion_models/seedvr2_3b_int8_convrot.safetensors">seedvr2_3b_int8_convrot.safetensors</a> → <code>models/diffusion_models</code> · 3.46 GB
</li>

<li><a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/SeedVR2/resolve/main/vae/seedvr2_ema_vae_fp16.safetensors">seedvr2_ema_vae_fp16.safetensors</a> → <code>models/vae</code> · 501 MB
</li>

</ul>
</li>
</ul>
The INT8 file gives the same picture as the full-size one (<a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/MOSS-Image/resolve/main/diffusion_models/moss_image_sft_bf16.safetensors">moss_image_sft_bf16</a>, 10.2 GB), about 2.4 times faster. For a smaller card there is a smaller text encoder, <a target="_blank" rel="ugc" href="https://huggingface.co/Comfy-Org/MOSS-Image/resolve/main/text_encoders/qwen3.5_9b_w4a8_gptq.safetensors">qwen3.5_9b_w4a8_gptq</a> (7.34 GB): pick it in Text encoder.
<h3>Tips</h3>
<ul>
<li>
Spell out every word. MOSS writes exactly the words you give it. Words it has to make up come out as gibberish,
 so put them in quotes, or let Auto prompt write them. Up to about 40 words came out right in my tests; a full page of
 text is too much.
</li>
<li>
Write "a young woman in her twenties" rather than "girl". MOSS draws a child for "girl". Auto prompt does this
 for you.
</li>
<li>
Start from it draws the person again from a description. If they come out looking different, say how
 they look in your words: "she has pale skin and freckles".
</li>
<li>
Change words: draw the box a little wider than the new words, and type them exactly as they should read. The box's words decide the letters.
</li>
<li>
Faint vertical stripes on a smooth sky or wall are a known quirk of this model. MATLOWAI's two
 <a target="_blank" rel="ugc" href="https://huggingface.co/MATLOWAI/MOSS-Image-SFT-DeBand">DeBand LoRAs</a> together, both at strength 1 in LoRA
 Loader, removed them in my tests; one alone barely helps.
</li>
<li>
Settings: 50 steps at CFG 3 with layer 22 skipped on the negative, the settings OpenMOSS gives. On an RTX 5090 a
 1.5 megapixel picture takes about 18 seconds, about 20 with Auto prompt or a picture. 8 and 4 steps run at CFG 1, as the speed LoRAs ask.
</li>
<li>
Size: 1 to 2 megapixels works best. The picture keeps the size you set in Latent Size, also with Start from it. Change words keeps the size of your picture. Enlarge 2x doubles it on each side.
</li>
</ul>
<h3>What it does not do</h3>
<ul>
<li>
No free editing. MOSS-Image draws new pictures from words. Start from it describes yours and draws a new one. Change words changes only what is inside your boxes: words on a sign, a shirt or a screen.
</li>
</ul>
<h3>Credits</h3>
MOSS-Image is by the OpenMOSS team, under the Apache 2.0 license. The ComfyUI files are Comfy-Org's. The speed LoRAs are by lodestones and akhaliq, under Apache 2.0. SeedVR2 is by ByteDance Seed, under Apache 2.0; its ComfyUI files are Comfy-Org's.
v1.3 (2026-10-19): Change words, a third choice for your picture. v1.2 (2026-10-19): Enlarge 2x with SeedVR2, and Layout Boxes 🆎 for the boxes, in both views. v1.1 (2026-10-18): the Steps pill, 50, 8 or 4 steps. v1.0 (2026-10-18): first release.
Questions or bugs: <a target="_blank" rel="ugc" href="https://github.com/ausboss/ComfyUI-AusBoss/issues">GitHub issues</a> or the comments here. Videos on <a target="_blank" rel="ugc" href="https://www.youtube.com/@ausbossdev">YouTube @ausbossdev</a>. More from me on <a target="_blank" rel="ugc" href="https://x.com/Zanzibased">X @Zanzibased</a> and <a target="_blank" rel="ugc" href="https://github.com/ausboss">GitHub</a>.

MOSS-Image Text to Image | 4-Step Turbo + SeedVR2 2x

Steps pill: 50, 8 or 4 steps. 8 and 4 use a speed LoRA and make a picture in about 2 seconds or 1.5 on an RTX 5090.<ul><li>One is picked at a time. The pill sets the steps and CFG and turns the matching LoRA row on in LoRA Loader.</li><li>Get the speed LoRAs from the note: lodestones' <code>lora_latest.safetensors</code> for 8 steps, and akhaliq's 4-step LoRA for 4 steps. The 4-step file downloads as <code>lora.safetensors</code>: rename it <code>MOSS-Image-SFT-4-steps.safetensors</code>.</li><li>A missing speed LoRA stops the run and names the file.</li></ul>Needs ComfyUI's development version from 2026-10-16 or newer and AusBoss nodes 2.13.0 or newer.

Files with SHA256: 34af5279bff4ff59bde31bfc592087134285f520bfbc197157c37acabcc150bc