ComfyUI Workflow for single image generationImportant note about the latest ComfyUI version: if you have already updated your version, some nodes may not behave as they should. I would recommend going back with a snapshot (like i did), otherwise you might have problems seeing the fast bypasser and many other things. If you haven't updated yet, don't do it now^^ the nodes can of course be updated normally.<ul><li>Needed Custom Node: <a target="_blank" rel="ugc" href="https://github.com/Rvage0815/ComfyUI-Rvaged.git">https://github.com/Rvage0815/ComfyUI-Rvaged.git</a></li><li>I've updated the node today (2024.08.11) so make sure you have the latest version. its not visible in the manager so check <a target="_blank" rel="ugc" href="https://civarchive.com/articles/6127/how-to-install-and-update-custom-nodes-by-hand">How to install custom nodes by hand </a>if you don't know.</li></ul>Everything you need is linked in <a target="_blank" rel="ugc" href="https://civarchive.com/articles/4642/links-resources">Links / Resources</a>. e.g.<ul><li>FLUX Schnell/Dev/NF4</li><li>FLUX ControlNet</li><li>SUPIR Checkpoint</li><li>SDXL All4One ControlNet</li><li>SDXL Tile ControlNet</li><li>Upscaler Links</li><li>...</li></ul>Changes:v3.5<ul><li>IMPORTANT: i have updated the rvaged node (again)</li><li>i've revised the controlnet section so that:<ul><li>you can use sdxl union in the correct way.</li><li>it is now possible to load images from a directory and use them for poses or depthmaps etc. with comfys auto queue function.</li><li>no controlnet updates for flux right now sorry.</li></ul></li><li>the remove text group has been reworked again, i think it works well now and has also shrunk a bit...</li><li>for no particular reason i have added a latent upscale sampler, i'm just kidding someone asked for it.</li><li>the sampler settings are now also available for the upscale checkpoint.</li><li>the sam model can be switched on/off.</li><li>for the detailers i added a wildcard node now, for the prompt but more important for the loras in the prompt. this prevents them from changing more of the image than they should but only the recognized area of the detailer. e.g. the loras for eyes and teeth.</li><li>i have tidied up some groups a little so that they look nicer, but i would recommend hiding the noodles, it is much more pleasant to work without them.</li><li>in front of each row is an fast groups bypasser. the first one contains all groups while the others only contain the specific groups for that row.</li><li>the loras used in the detailers are also saved into the generation data of the image (when using the save gen-data group)</li></ul>v3.0IMPORTANT: i have updated the rvaged node<ul><li>added some passer and a different scheduler selector (its smaller)</li></ul>reworked some groups<ul><li>flux/sd3 share one group</li><li>prompt area: switched from the 3 crea nodes to the single one<ul><li>added one more wildcard node, its like a suffix that will be added after the crea node.</li></ul></li><li>added <a target="_blank" rel="ugc" href="https://github.com/receyuki/comfyui-prompt-reader-node">sd prompt reader</a> to get the image infos when using upscale image folder</li><li>shrinked the wf a bit</li><li>fixed the issues when running the workflow in 2 steps. (Image Gen-Data and Loras will be save to the file now)</li></ul>the archiv contains a preset for sdxl and one for flux, i've also added the fashion wildcards again.v2.6<ul><li>some small optimizations<ul><li>they way the image flows -&gt; 1st sampler or upscale image groups -&gt; remove text -&gt; 2nd sampler (to fix visible areas)</li><li>added a prompt node in the detailer groups (collapse to edit the prompt, ran a bit out of space)<ul><li>requires the installation of this node: <a target="_blank" rel="ugc" href="https://github.com/abyz22/image_control">https://github.com/abyz22/image_control</a></li></ul></li><li>in the 2nd sampler its possible to diable the upscale model and/or the downscale node.</li></ul></li></ul>v2.5<ul><li>IMPORTANT: Update the <a target="_blank" rel="ugc" href="https://github.com/Rvage0815/ComfyUI-Rvaged">Rvaged Node</a><ul><li>i've added a guider switch to switch between the basic guider (flux no neg cond) and the cfg guider (all other).</li></ul></li><li>reworked some groups</li><li>reordered the model groups, loras, model charger, sampler settings</li><li>using the custom sampler as standard now</li><li>added a lora stack for the upscaler checkpoint</li><li>added bookmark for faster jumping around in the workflow (0-9)<ul><li>you have to disable the image chooser shortcuts in the comfyui settings (comfyui panel -&gt; the gear top right)</li></ul></li><li>added some notes here and there</li><li>added the fashion wildcards to the archiv. the others can be found here:<ul><li>-&gt; <a target="_blank" rel="ugc" href="https://civarchive.com/models/613244?modelVersionId=685520">luxy lingery</a></li><li>-&gt; <a target="_blank" rel="ugc" href="https://civarchive.com/models/20868/200-wildcards-nsfw-and-sfw">200wildcards</a></li></ul></li></ul>v2.0<ul><li>added flux support<ul><li>Check how to install <a target="_blank" rel="ugc" href="https://github.com/comfyanonymous/ComfyUI_examples/tree/master/flux">here</a></li><li>Update ComfyUI</li></ul></li><li>added face swap</li></ul>Features:<ul><li>Every Group can be disabled,</li><li>i've added a new version of Remove Text to remove watermarks in each corner.<ul><li>the size of the masks can be changed.</li><li>each corner can be switched on/off</li></ul></li><li>you can use 2 checkpoints (one for the initial render and one for the upscale)<ul><li>current preset is: FLUX (Init Render) and dreamshaperXL lightning (upscale)</li></ul></li><li>it also allows to upscale already existing images (Load Image Node or Load Images from Folder)<ul><li>disable both Sampler Groups and the checkpoint loader that you don't want to use.</li></ul></li></ul>With the new node set "Crea-Prompt" this workflow is heavily using random prompts. this can be an issue if you want to change things and restart the generation, but the last prompt is shown in the ShowText Node and also in the console. i've left a description of how to re-generate the last image in the workflow.it has 3 upscalers:<ul><li>1 after the first sampler that is mainly there to improve the initial render.</li><li>2 is a combination of supir (can be turned off) and tiled diffusion with a tile controlnet.</li><li>3 is basicly a copy of 2 without supir. (can be turned off)</li><li>i've added 3 detailers, they do what you set them up for. if you put a hand model its a hand detailer. default setup is face, eye, hand.</li></ul>there are some filters, LUTs and 2 Watermark Groups that i've already used in the magic moments workflow.it saves the generation data into the image file.<ul><li>there are 2 groups to save the image<ul><li>1. WAS Node Save Image<ul><li>if you don't want to share the gen-data when uploaing images.</li></ul></li><li>2. Save Image with Gen-Data<ul><li>its preset NOT to embed the workflow because i don't want to share it everytime when i upload an image but it is saved as json file using the same name as the image file.</li></ul></li></ul></li></ul>

iGEN (FLUX/SD3/SDXL/PONY/SD1.5) with FluxNet, SUPIR, Tile Upscale, Florence2, WD14, Face Swap

<ul><li>IMPORTANT: Please update the <a target="_blank" rel="ugc" href="https://github.com/Rvage0815/ComfyUI-Rvaged.git">Rvaged Node</a> (i had to add several things)</li><li>4.01 contains a Switch for the Flux Sampling Node in the Regular Checkpoint Loader group, I forgot to add this in 4.0 e.g. for the <a target="_blank" rel="ugc" href="https://civitai.com/models/645943?modelVersionId=722620">Baked FLUX</a></li><li>complete rebuilded version</li><li>added controlnet for FLUX</li><li>FLUX Loras should work</li><li>The 2 Groups: Load Image / Load Images from Folder works for:<ul><li>Image to Prompt</li><li>Image for the ControlNet</li><li>for Image to Image</li><li>all above can be used together</li><li>and finally to just upscale it with latent and/or SUPIR + Tile Upscale</li></ul></li><li>i've added some presets for you to check which groups are active<ul><li>check the Project Folder group if Custom Size is set to yes, i might have forgotten to change that back during the tests.</li></ul></li></ul>

Files with SHA256: 1fa47c479d698fded09e5da433f12f08f4d278c4579ca83ca86b1ffe6ea0736b