It's trained on the 14B model.
It works for Image to Video and Text to Video.
For I2V I'm using wan2.1-i2v-14b-480p-Q5_K_S.gguf and for T2V I'm using wan2.1-t2v-14b-Q5_K_S.gguf; it works on these, don't know how other models will perform.
The sample videos were all with a strength of 1.
I've found Text to Video can be a bit finicky with getting particular angles/viewpoints, but it follows instructions on the rest of the scene pretty well. Also the quality of the T2V images doesn't seem great, but I'm using the .gguf model at a low resolution and low steps, so that might just be my setup. Image to Video gives pretty good results it seems.
Props to https://civarchive.com/user/dtwr434 for tips on training!
Description
FAQ
Comments (152)
Disable blocks 20->39 to make this LORA look much better with T2V
What do you mean? TBH I'm not really very familiar with all the technicalities, I've just followed various tutorials/guides to do this. What are blocks?
@aipinups69 That node is available only on Kijai's workflow I believe. With Native comfy you don't have that fine control , unless I'm misinformed
@Melty1989 oh so would blocks be nodes? On that workflow are the nodes numbered?
@aipinups69 in the Wan Video Model lora node (for T2V Kijai's workflow), drag the Lora input out and then insert a WanVideo Lora Select node. Then, in the wanVideo lora select node, you should see a Blocks input. Drag that input out and you'll get WanVideo Lora Block edit node.
@Melty1989 could you link me to that workflow please?
@aipinups69 You already have it. Go to custom_nodes->ComfyUI-WanVideowrapper folder, inside there you'll find an example folder with the workflows.
@Melty1989 thanks!
OMG, this works better than I could have imagined
yeah I was a bit surprised myself lol
does this work only when there is a dick already on the mouth of a woman on the image2video or how does it work?
We all know why you asked that question 😂
i was asking if this lora just adds the back and forth animation @DomDomTomTom maybe the lora was adding also the man
For I2V it works best if the guy is already there; you can do it without, but the transition won't look very good.
@aipinups69 what do i have to write in the promt ? just blowjob or something specific
@john455454674 check out the prompts on the sample images, they should give you a starting point.
In general though, I start the prompt with "blowjob, deepthroat" and use the phrases "the woman is performing oral sex on the man" and "bobbing her head back and forth, the penis is going deep into her mouth". I may switch "up and down" for "back and forth" depending on the angle of the shot, tbh I'm not sure if it really makes any difference though.
@aipinups69 ok thanks for the info
could u post a WF
These are what I've been using:
hi,which lora models work on WAN 2.1?
When searching for models set the filter for "Base model" to "Wan Video" and those should work.
@aipinups69 How do I create it from scratch?
@ApexThunder_Ai You mean training a lora? This is the guide I followed;
https://www.youtube.com/watch?v=T_wmF98K-ew
@aipinups69 thx a lot :)
@ApexThunder_Ai just a couple of things to note actually:
when following that youtube guide, using exactly those settings worked for me for training with image files only (which I used for my big breasts lora)
for doing this lora, I wanted to use video files. if you look at the person I shouted out in the description here, check their POV blowjob lora and you'll see some comments of mine and their responses about doing the training. these helped, but I ran out of memory on runpod when doing it - so when selecting the pod, you get the option of how many GPUs to add - I used 2, and it worked.
@aipinups69 ok
how to train for won I2V model (or do you train for Wan T2V and it also work for both ?) and if so how to train for Wan T2V model anyway :p ?
I used this guide for training:
https://www.youtube.com/watch?v=T_wmF98K-ew
This is set up for T2V, but it turned out to also work on I2V
@aipinups69 thanks, seems very similar than training for Hunyuan, I don't run on runpod, but I might try on my pc locally, and if OOm then OOm it will be :)
How many steps/epochs did you train this for?
80 epochs
@aipinups69 What about network rate, batch size, learning rate etc trying to make my LoRa for wan to be consistent and remove glitches and I cant find good training settings as it seems to be both underfit and overfit at the same time
@basedbase sorry, to be honest I don't really know much about the various settings and such. I followed this video pretty much to the letter (only thing different was I used the 14b model):
https://www.youtube.com/watch?v=T_wmF98K-ew
This was what I used for my Big Breasts LoRa, which was all using images for training.
For this one I used videos. Take a look at this model:
https://civitai.com/models/1333923/wan-pov-blowjob?modelVersionId=1506224
In the comments section you'll see me asking for some info, the creator responded and mentioned they put their training data in another model of theirs. So I used that as a base, both for the captioning and the config files. One thing to note, following the above YouTube guide worked for training on images, but I ran out of memory on RunPod when doing the same using videos. So I ran the pod with extra GPUs and it then worked.
Sorry I couldn't really give much more detail but I hope that helps a bit!
@aipinups69 Trying it out right now if this time its still bad after training many many times I might end up renting an H100 so I can train on high frame brackets
I do feel like Hunyuan gives better T2V results, although this works perfectly fine.
I am using about the same video sizes, but Wan's outputs have significantly more noise than Hun was ever outputting. A little sad. The raw T2V for me was working quite well, but as I add different loras, they are all coming out similar. I think I'll have to try out a different workflow to see if Im improperly applying lora's or something.
Someone mentioned blocks. Maybe that's it.
I'm finding that generating higher resolution videos like 720p doesn't work with most loras here. I'm wondering if it's a training issue.
@azeli There was a mention of including HD photos with training in the cowgirl lora thread. I think theres also the whole thread of people training and using different quanitized versions -- however I have no idea how that works in relation to the Lora quality
I noticed that a couple of lora's for WAN need to have their strength dialed back a lot to around 0.4, otherwise they would give artifacts. Maybe you can try that?
@funscripter627 That's like the most obvious thing, and I never bloody tried it. face palm
@makiaevelio543 I feel like something isn't quite right with the training process for WAN at this point. All loras here are ruining the quality of the video significantly in I2V. WAN's default output is amazing, the loras are ruining it.
@azeli lowering the strength seems to help most loras, some times it'll improve the artifacts but you'll lose out on motion. Also, I think most of these "amazing" looking examples are using I2V, so it's not like it's completely broken.
I think it'll just be a feeling-out process again and getting strengths right again. I'd need to see some exact comparisons -- cause the people that said their loras were more/less their hunyuan training worked well for me (or at least better than some others). It's a little frustrating, as you mention, cause it feels like its so close.
Also, I think Clip skip was hurting outputs when I used it before the Loras, but less so without loras applied.
There's also something to be said about conflicting prompts, like I was noticing in the one BDSM Lora if you included multiple of the keywords, it'd completely fry the output. Maybe some loras have words that are either ignored via common negatives or contradicted by prompts, maybe it hurts the output. You could also have the opposite, more obvious problem, of improperly tagged training sets to begin with.
@makiaevelio543 I'm not kidding when I say some gens at 480p give me ok results, the same with 720p gives me an orange mess with men.... This is getting too much!
This works really great, truly amazing!
Would love it if you could create a similar lora, but where the woman is more on the passive side, i.e. facefucking instead of active blowjob/deepthroat.
You need to prompt it accordingly. e.g. a woman closes her eyes and deepthroats a large penis, fellatio, oral sex, passionately sucking a penis
@boinobin730 That still just makes a woman give a deepthroat, not receive one, if know what I mean.
@zym0x probably can be redone with better source images for a LORA.
Prompt for it, something about her being still + The man is pushing his penis into her mouth.
Excellent lora. I2V fine. Need cum lora!
works really well! Great lora <3 Thank you
for some reason I can not load the lora. It doesn't show an error but I am already waiting 30 minutes. Anybody the same experience?
can you help us get the sage attention to work
Sorry, this was the guide I used for sage attention:
https://www.reddit.com/r/StableDiffusion/comments/1j0enkx/automatic_installation_of_triton_and/
and it's since been updated as apparently sage attention no longer works with the updated version of ComfyUI. You can just deactivate the node in workflow though and it'll still work, albeit slower
@aipinups69 i disabled it and my result was just a black screen
@Badfaith Sorry, I don't know what to advise - I don't really know much about this myself tbh and just follow guides and such. I have the sage attention node deactivated in my workflow and it's working OK. Reddit or others here may be able to help - good luck!
I followed the direction in your link to install Triton and SageAttention today successfully. The auto-installer script apparently doesn't work, but I just installed Triton and Sage for comfy directly and it's working.
As of 2025 you can now install sage and triton ultra easily. Open a command in your folder ..\ComfyUI_windows_portable\ComfyUI and type those two commands one after the other:
pip install triton-windows
pip install sageattention
@SD_AI_2025 where would that be in swarm?
@SD_AI_2025 Thanks for the info mate worked great! <3
Here is a translation of the neg prompt to save folks 5 secs on Google translate. I'm guessing it still works in either language.
tattoo, bright colors, overexposed, static, blurred details, subtitles, style, artwork, painting, picture, still, overall gray, worst quality, low quality, JPEG compression residue, ugly, incomplete, extra fingers, poorly drawn hands, poorly drawn faces, deformed, disfigured, malformed limbs, fused fingers, still picture, cluttered background, three legs, many people in the background, walking backwards
any tips on best SDXL model to generate the blowjob image for I2V Wan?
Lustify endgame
bro literally any realism sdxl will work fine
biglust v16 + deepblowjob lora
https://civitai.com/models/575395/big-lust
https://civitai.com/models/616699/deep-blowjob-bigasp
is there a way to run any high quality I2V model like this on a 6GB VRAM? as i do not have money or a hardware to run heavy models.
I don't think so, unfortunately. At the moment I am using RunPod, which allows you to rent a GPU for a relatively low cost.
@aipinups69 Thanks For answering
I run Nvidia GeForce RTX 4060 Ti with 8 GB. Hunyan models gave me some issues (some gens worked but it mostly didn't), I've had great success with Wan models using ComfyUI. I feel you could get ComfyUI and Wan to work okay. It wouldn't be top tier, but it would be pretty good and above average. If you set up your ComfyUI workflow optimally then you should be able to get some decent looking gens. There's a few discord servers (civitai has one and "unstable diffusion" discord is popular) that can help with setups. Also, once you get ComfyUI set up, you can drag a lot of the videos (made using ComfyUI) into the app and it will show you the workflow used - then you can just install missing items, etc. You would probably need to tweak it to work with lower VRAM, but once you get a good low VRAM workflow, you'll be okay.
@agentx Wow! Thanks for the detailed explanation
@FunkyPerv hola, de hecho ya hay tutoriales donde dicen que puede wjwcutarlo con wan2.1 en tarjetas de 4gb de vram. Hay modelos para tarjetas graficas de menos capacidad
Thank you very much for this, it works really good, that's a dream come true
When I use anime or 3dcg images the output always becomes a realistic video for some reason, anyone knows why?
If it wasn't trained on animated things it very rarely will work if at all on animated images
ah was wondering why my output morphed into realistic
Works a treat, any chance of a pussy licking lora, or hell licking in general
Is there a tutorial on how to create these videos ?
I use ComfyUI - Search that on YouTube, there's loads of tutorials on how to get that running.
Once you've got that going, you can drag one of my videos here into it, and it will load the workflow used. Alternatively you can look at my articles on here and I posted one which has my workflows.
When you load in the workflow, ComfyUI will automatically detect if you have any missing nodes, and you can then install them.
It took me a few days to get my head around it, but there's lots of resources on YouTube and Reddit, and it starts to make more sense the more you play with it. Good luck!
how do you "drag" one of your videos into comfyui? When i drag one from the gallery below comfyui says, "unable to process dropped item: TypeError: Failed to fetch"
Thanks for the help
@sidlittle618947 I want to know the answer as well.
@sidlittle618947 I just have ComfyUI open to any workflow, then drag the video file from another window into the empty space in the ComfyUI workflow view.
Are you using my videos specifically, or videos from the gallery that other people have posted? Some of those might not contain the metadata.
@aipinups69 I got your workflow working from the downloaded video. When trying to make my own from a picture I am getting an error "KSamplerAdvanced No module named 'sageattention'"
Did you get this error or know a fix?
Googling seems to not have an answer, I'm on windows.
Thanks again
What's the difference between yours and dtwr434 one? Looks like yours is dated earlier but did you train yours more then him or on different positions?
Don't know about training or anything but their one seems to be specifically POV only
Any tips on preventing the penis from morphing in shape (especially the glans), or bending impossibly? Perhaps my starter image has the girl too far away? I have tried the following negative prompts to no avail "distorting penis, penis changing shape, penis getting longer, penis morphing, penis bends, penis bent"
Unfortunately no, it's a problem I've noticed. I think having the woman starting too far away/too zoomed out is probably the issue - the training videos were all close-ups and my theory is that the range of movement is baked in, so the further away, the worse the effect. Using one of my penis Loras might help a bit.
@aipinups69 thanks I'll try the penis LoRA and see how it goes, along with bringing the girl closer. The other vids where your LoRA looks great are a definite incentive to putting the work in to get this right, but it's not been as easy as other porn LoRAs.
Maybe a dumb question. But what else can we do with it? I mean can I add a custom face to it?
You mean like with a character Lora? I don't see why that wouldn't work.
@aipinups69 yes. That's what I mean. How can I add a character Lora to it that isn't trained for a blowjob?
@zoroofcalls378 As long as your workflow allows you to use multiple Loras, just add in the character Lora and it should work.
Can you train a big model? GGuf format compression is too serious!
This was trained on the full 14B model, the quality issue is more to do with the quality and size of the training data, as I was just starting out with figuring out training. I'll probably get around to doing a better one at some point.
@aipinups69 Looking forward to your next version! grateful
How many videos did you train this on? Just curious
20 videos, each 3 seconds long
I think i do something wrong the girls allway suck some random objects
Have you tried loading the videos into ComfyUI and looking at the prompts in the workflow and basing yours on those? It's also useful to combine this with one of my penis Loras.
@aipinups69 yes exactly that workflow but it make me strange things, but the I2V model work well
Yeah, it's wild. This prompt gives me all sort of weird flesh tone objects but never a penis, even when combined with using the penis lora he has. I've tried a different workflow I found and I get a more penis-esque object, but the Lora causes a wildly pixelated result. When I remove it, the image is crystal clear. It's weird.
daym i'm laughing sorry bro
@tayjames868686 ok i have the same issue after trying 4+ i2v, i only using this lora strength 1.0 just like instruction, but i don't know what's wrong.. still svcking something like flesh
This is why I never even use T2V, you will waste time generating bad output. Just get a decent picture of a girl sucking cock with flux or a different model if you want, then use the I2V after you have generated the base image. Its a good way to provide more info to to the model about what you want.
Is there a pre-built workflow you would recommend for image-to-video for use with this LoRA? Also, what kind of positive prompts do you use or recommend to achieve the results like in the sample videos. Thanks!
did you find a workflow?
@sidlittle618947 nope. found a different LoRA hahaha
Do you train with the T2V checkpoint or can you use the I2V? I will be using my lora with I2V gen, but wondering if I can use the I2V checkpoint to train?
Hello, can you help me with the installation?
Sorry, I'm not the best person to ask, all my Loras have been trained from following tutorials so I don't know any of the tech stuff. I can advise that for all of my Loras, I trained them using the T2V model.
@aipinups69 I've tried several times, but the penis doesn't come out properly. The prompt I typed is as follows
blowjob, deepthroat. a man's large penis is prominently displayed. woman giving him a blowjob, bobbing her head back and forth, penis going deep into her mouth. pushing the whole penis into her mouth. looking at the camera, eye contact.
any other prompt suggestions for me to do i2v?
doesn't it work on 720p? I get weird result
Seems it was trained for 480p, so 720p won't work well/at all, unfortunately.
If you're wondering what prompts to use, this has worked flawlessly for me:
positive: deepthroat, blowjob, a woman in a pornographic film with a man standing in front of her, the woman gives oral sex to the man's penis
negative: <none>
Hey guys this will be probably a dumb question. Do you have a suggestion for a good LoRa for clothing removal? Say I wanted the officer lady in the first example of this blowjob LoRa to remove that uniform...which LoRa or model is doing that best and how best to implement? When I try to achieve "strip down to naked" from most of my generations some really silly stuff happens or the character in image does nothing at all. Still learning be gentle, thanks.
Have you tried other terms? 'She removes her clothes.' 'She takes off her clothes.' 'The woman removes her clothes revealing her naked body underneath.' 'The girl removes her top to expose her naked breasts.' 'the girl rips off her shirt.'
I'm very new to wan2.1 too, so I don't know if these would work, but your sentence isn't quite proper English. My understanding is that in the prompt you can be quite descriptive, so it has more information to go on.
you dont really need lora for that, base model can do this
try prompts like "takes off her top"
You need to be more specific. You start with the top.
"She is standing and looking at the camera. She pulls up her top to show her naked breasts."
Then add another sentence after the period for each action.
Thanks all. Im playing with prompting and using more descriptive language. Sometimes it works like a charm, other times with the same wording it fails spectacularly.
Truly the GOAT of throats
Please do a 720p Version ! Please !
Hello guys can u help me please? I run this workflow and i have error " 'conv_in.weight' "
how did you find the workflow?
Try smaller resolution
how to use this on stable diffusion automatic 1111? can't find a tutorial
you don't. only comfyUI
@Ajaxdiffusion oh tks
where i find the worfklow for this guys?
wondering the same mate!
I tried with your model and lora, but i can't get optimal result as yours... Penis aren't "real" penis and movement isn't smooth. Is there any other Lora? or pompt tips?
What should I write in the prompt?
I keep finding it stretches the penis if you give it too wide a shot.
Yeah I think I mentioned this in another comment somewhere. My theory is that because it was trained on close up shots, the range of motion across the image has been somewhat baked in, regardless of the length of the actual shot being generated
Pretty good model!
Is there any chance you make a 1.3B or 14B version ? Guff is incredibly slow and poor quality, also not compatible with others lora
something wrong with the site? I can't use any of wan safetensors, models are missing everytime i click create
It would be nice to add the option to start at the point where the penis is not yet inside the mouth, walking towards it and then starting a bj
I don't think there's any good loras for that. I found this one (actually by the same author) which does what you want (starts outside and enters the mouth), but the quality is poor, so you need to use low strength and around 15 generations or more until it actually works properly. Most of the time WAN fails to insert into mouth.
https://civitai.com/models/1515071/wan-21-deepthroat-facefuck-entry-blowjob-fellatio-oral-lora-t2v-14b
Here's also a VERY high quality blowjob lora, but this one CANNOT start with the penis outside the mouth. It has to start from a picture of a blowjob photo, because like pretty much all other blowjob LORAs, it was trained on 5-second clips of already ongoing blowjobs which didn't include the "entry" part.
https://civitai.com/models/1395313/wan-dr34mjob-doublesinglehandy-blowjob
It may be worth combining both of these. With dr34mjob at 0.9-1.0 strength, and deepthroat-entry at 0.5 strength. Something like that may be the best of both worlds.
Great action but for me it always changes the woman's face from the original starting image, while with other loras like the cumsh0t i2v lora it does not change the face at all. Also the pen1s gets stretched often longer than it was originally.
Have you considered creating a LoRA that enhances the penis style? I often get an alien tentacle in the anime style.
I have a couple that I tend to use at various strengths which can help a bit:
https://civitai.com/models/1387077/wan-21-erect-penis-cock-dick-lora-i2v
https://civitai.com/models/1358184/wan-21-penis-cock-dick-lora-t2v-i2v
Works better than a lot of the other ones.
IMPORTANT: INFORM ALL WAN USERS! I DISCOVERED HOW TO USE LORAS 'NSFW/SFW' IN WAN 2.2 T2V, GETTING THE FULL POTENTIAL OF "HIGH NOISE" AND "LOW NOISE." THE RESULTS WERE IMPRESSIVE!! I ran it on an RTX 3060 6GB, 32GB RAM, 480x480, length: 41, generation time: 5 minutes to generate each video. The quality is fantastic! For those of you with more powerful computers, the results will be even more incredible. I used the models: WAN 2.2 - Q4_1.gguf FOLLOW THE STEPS BELOW: 1: Don't use acceleration/enhancement LoRas (such as Lightx2v or other) on "high noise"; use only on "low noise" with strength 1. (I'm using this version of Lightx2v LoRa): lightx2v_T2V_14B_cfg_step_distill_v2_lora_rank64_bf16 2: Use 'NSFW/SFW' LoRas on both "high noise" and "low noise" models. On "high noise," use strength 2, and on "low noise," use half the strength, with strength 1. You can vary the strengths as you like, but always keep the "low noise" strength at half the strength of the "high noise." 3: Use these settings in KSamplers: "high noise": steps: 9 / cfg: 3.5 / euler/simple / start_at_step: 0 / end_at_step: 4 "low noise": steps: 9 / cfg: 1.0 / euler/simple / start_at_step: 4 / end_at_step: 10000 Note: To improve speed, I set the Windows system to "best performance," disable unnecessary background programs and applications, and lower the desktop resolution. This significantly speeds up video generation. I hope this helps.
Could you provide the workflow, thanks a lot, bro?
Use these settings in KSamplers: "high noise": steps: 9 / cfg: 3.5 / euler/simple / start_at_step: 0 / end_at_step: 4 "low noise": steps: 9 / cfg: 1.0 / euler/simple / start_at_step: 4 / end_at_step: 10000
This worked for me! getting much better results, thanks bro o7
come on, please give us a workflow
can you please share the workflow to this?
I using Trigger Worlds but it simply give me nonsense result, not close to the sample ones.
Tried multiple Loras but this one is the only one work for deepthroat....
The only deepthroat we need. lol, really good !
Hi! Why would Mage give so many errors when using Wan 2.1?
Do Causvid lora impact these kind of animations?
Cuz im never get even close of resuilts like u guys posting.
does the guy already need to be in the frame?
Details
Files
deepthroat_epoch_80.safetensors
Mirrors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
107_deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
wan_dt.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors
deepthroat_epoch_80.safetensors